Separate names with a comma.
Discussion in 'Triumph Tigers' started by Xcountry-Rider, Aug 12, 2011.
Have any detailed pictures/build instructions on your tool tube? Looks DIY with 4" PVC, hose clamps?
its 90mm stormwater pipe with a blank cap glued on the bottom and a threaded inspection cap glued to the top. It's about 600mm long from memory. Held on by 2 stainless 100mm ducting clips. Spray painted it black. I bought all the parts at a hardware store...I had to buy the pipe in a 3m length but it was like $20.00. I made 3 Tool tubes and sold the other two. Because of the length, you need to get a tube sze you can get your hand into.
Out and about for my Fiance's birthday around Concord, MA.
Nothing exciting, just rode to work.
Found this outside Morrison. Decided it was a "sign" that I should take a picture.
My dusty gal after 350 miles of dust and dirt last weekend
Smoke Hole canyon in WV and an unknown lake in the GW national forest
Edges of death valley
Showing the Tiger flag at the Touratech Active Adventure 2020:
Note to self: Next time, do the sections with red clay on the first day, not the second day. Sure, most soft ground can end up with deep ruts. But deep ruts in clay that first got dewed on in the night, then baked out in the sun are fucking concrete.
1000 miles last weekend through Nevada areas